Jinzhou industrial wastewater treatment, industrial wastewater treatment pharmaceuticals, environmental protection provided by the Luoyang Luoyang Yu Quan Yu Quan sewage treatment Limited. Jinzhou industrial wastewater treatment, industrial wastewater treatment pharmaceuticals, environmental protection is Luoyang Luoyang Yu Quan Yu Quan Sewage Treatment Co., Ltd. (www.yuquankj.net) launched this new upgrade, the above picture is only for reference, please call or pictures on this page contact telephone number, to obtain the latest information, contact: Chang Chih-feng. Installation procedure integrated wastewater treatment equipment - integrated wastewater treatment equipment based on acceptance: acceptance should be at the basis of participation and B sides and supervision side, foundation construction side, according to the construction drawings and civil engineering design basis recording units to provide for acceptance . Focus on examination of the geometry-based elevation, coordinates the centerline, levelness and shape, the foundation holes industrial wastewater treatment methods, the deviation meets specification, and make the appropriate record. After acceptance, construction units should install the unit, to handle the cross-Out Party representative, and provide the basis for a complete completion data. Sewage treatment equipment maintenance considerations --1, sewage treatment equipment oil change: namely, open the sealed chamber and the motor inside the screw hole, put the seal chamber and motor oil all the internal release, replaced with new oil to ensure that the lubrication system normal the work. 2. Check the sewage treatment equipment consumables: submersible pump impeller, buckles, bushings, bearing, etc. are wearing parts. Should first remove the pump part of the industrial wastewater treatment, check consumable parts are intact. Do not use damaged and substandard parts. 3, anti-rust split pump housing: Before spring using Langfang industrial wastewater treatment, should open the top level of the pump housing, impeller rotation starter after closing to prevent rusting parts can not properly burned starter motor. This is particularly important for maintenance of water-filled motors.